Back to FPV System

EWRF e7082C Pro 0mW/25mW/100mW/200mW/OFF Switched 5.8G 48CH VTX FPV Transmitter Support Pitmode OSD Configuration

Local Warehouse
Fast Shipping
Quality Guarantee
Secure Payment
100% Customer Satisfaction
Check Price
SKU: 1268248


EWRF e7082C 25mW/100mW/200mW/OFF Power Adjustable 5.8G 48CH AIO VTX FPV Transmitter
Model: EWRF  e7082C
Frequency: 5.8G 48CH
Transmitting Power : 25mW/100mW/200mW/OFF(Pitmode)
Power supply: DC5-24V
Supply current(12v): 75mA(25mW)/100mA(100mW)/130mA(200mW)
Weight : 2.1g(Including antenna weight 1g)
Standard size:22*14*5mm
Adjustable 4 modes:25mW/100mW/200mW/OFF 
Betaflight/Cleanflight OSD configuring parameter
Clean powerup and channel switching without interference to others
Miniature and light weight design

Band CH1 CH2 CH3 CH4 CH 5 CH6 CH7 CH8
A 5865 5845 5825 5805 5785 5765 5745 5725
b 5733 5752 5771 5790 5809 5828 5847 5866
c 5705 5685 5665 5645 5885 5905 5925 5945
d 5740 5760 5780 5800 5820 5840 5860 5880
E 5658 5695 5732 5769 5806 5843 5880 5917
F 5362 5399 5436 5473 5510 5547 5584 5621


Key configuration:
  After power on,press and hold the button to enter (configuration mode) channel number, channel group and power. and hold the button until the red light flashing , adjustable channel frequency (1,2,3,4,5,6,7,8).
    Short press the button at this time, you can switch the channel frequency. The blue light flashes to indicate channel frequency 1, blue light flashes a few times to express corresponding channel frequency
  2.Press and hold the button until the red light flashing twice, adjustable channel group (A, b, c, d, E, F).
   Short press the button at this time to switch the channel group. Blue light flashes for channel group A The number of blue lights flashes each increment  and then, it is expressed as (b, c, d, E, F).
  3 Press and hold the button until the red light flashing three times, you can adjust the power. Short press the button to switch the power, blue light flashes that 25mw, two flash 100mw, three flash 200mw.
  4. press and hold the button finish parameters setting,  red, blue keep on.
  5. Press the button twice quickly, when the red light is always on, the blue light off means the RF is off. Press twice quickly, when the red light,the blue light on means the RF is on.
Package Included
1 x EWRF e7082C 25mW/100mW/200mW/OFF 5.8G 48CH Transmitter